• Polyurethane Liquid Applied Waterproofing Coating
enquire
Polyurethane Liquid Applied Waterproofing Coating system is applied to repair and protect badly corroded metal cladding panels

Polyurethane Liquid Applied Waterproofing Coating is an ideal application for roofing areas, vents and pipes, HVAC and ducting and more

roofing corrosion damage

Corrosion is detected across a roof. Damage to the joints of the fibreglass and aluminium roof cladding is causing leaks inside the building

roofing repair reinforcement fleece embedment coat

Self Adhesive Scrim Tape is applied to the Bristle Blasted and primed areas. An Embedment Coat is then easily and quickly applied on top as part of this Waterproofing Coating system

topcoat polyurethane waterproofing solution

The Top Coat application completes the roofing repair and protection project, providing an effective, lasting, waterproofing solution

Polyurethane Liquid Applied Waterproofing Coating system is applied to repair and protect badly corroded metal cladding panels
roofing corrosion damage
roofing repair reinforcement fleece embedment coat
topcoat polyurethane waterproofing solution

Polyurethane Liquid Applied Waterproofing Coating is a cold applied, low odour waterproofing system for refurbishment and new build structures.

This Waterproofing Coating is a high solids, polyurethane system that solves the problems associated with the long-term waterproofing of flat, pitched and domed roofs. It is compatible with most existing roof membranes and provides excellent resistance to ponded water.

This Polyurethane Waterproofing Coating is an ideal long-term solution to leaking flat roofs. Unlike conventional roofing systems, it forms a completely seamless membrane on the roof and incorporates details with ease and cures in just 24 hours. The Fibretex liquid applied component provides waterproofing for upstands and detailing work.

The Coating is safe and easy to install, even on weathered and damaged substrates, ensuring minimal disruption and risk.

Polyurethane Liquid Applied Waterproofing Coating is designed to:

  • Encapsulate an entire roof seamlessly –  including any plant and protrusions – forming a breathable, waterproof barrier
  • Safely and easily apply
  • Easily maintain
  • Suitable for  many types of traditional roofing materials including felt, asphalt, bitumen, asbestos cement sheet, fibre cement sheet, concrete, single ply membranes and profiled metal sheets.

Polyurethane Liquid Applied Waterproofing Coating Application Areas include:

  • Roofing areas
  • Vents and pipes
  • Rainwater outlets
  • Parapet walls
  • Rooflights
  • HVAC and ducting
  • Many existing substrates
enquire

Cactus Liquid Applied Waterproof Roofing Solution system uses Elastaprime multi substrate primer . It’s a high performance universal primer that provides excellent binding and adhesion to most substrates including plastics, wood, mineral substrates, ceramic tile, copper, zinc, brass, steel, galvanised steel, aluminium etc. Winter painting operations are possible due to tolerance of low temperature/high humidity conditions.

Typical Thickness 100 microns dft from 145 microns wet
Theoretical Coverage 7 square metres per litre
Practical Coverage Reduce above by up to 20%
Mix Ratio
(by volume)
2.75 : 1.25
Base : Activator
Method of Application Brushing or spraying for structural steel work. Airless spray preferred for large areas such as storage tanks.
Drying Time 8 – 16 hours (Touch Dry)
24 hours (Hard Dry)
Pack Size 4 litre unit

 

 

Cactus Liquid Applied Waterproof Roofing Solution Elastaseal Binder Sealer & Primer is an all-aliphatic stabilising sealer and primer for use on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render, etc.

Intended Uses For use on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render etc.
Theoretical Coverage Up to 12 square metres/litre/coat. (low porosity substrates)
Practical Coverage Typically 10 square metres/litre on porous and/or rough surfaces.
Varies according to porosity, surface profile, etc
Mix Ratio
(by weight/volume)
10 : 1
Base : Activator
Method of Application Brush, roller.
Two coats may be necessary on highly porous substrates.
Drying Time
(at 20°C substrate temperature)
2 hours (Touch Dry)

3 hours (Hard Dry)

Pack Size 5 litres

Cactus Liquid Applied Waterproof Roofing Solution Elastaseal Embedment Coat is for application in conjunction with Elastamat glass fibre reinforcement as the basecoat in this Waterproof Roofing system.

Typical Thickness 0.9 – 1.1mm dft including reinforcement
Theoretical Coverage 0.8 – 1.0 square metres per litre
Practical Coverage Dependent on surface profile
Method of Application Brush or roller
Drying Time 8 hours (Touch Dry)

24 hours (Hard Dry)

Pack Size 12.5 litres

Cactus Liquid Applied Waterproof Roofing Solution Elastaseal Top Coat is a cold applied single pack, ultra high solids moisture activated elastomeric urethane coating. 

Typical Thickness 0.45 – 0.9mm dft per coat
(depending on the system)
Theoretical Coverage 1 – 2 square metres per litre coat
Practical Coverage Dependent on surface profile, reinforcement where applicable etc.
Method of Application Brush or roller. May be used as the carrier for Elastamat glass fibre reinforcement matting on localised repairs.
Do not apply is rain is imminent
Drying Time 8 hours (Touch Dry)

24 hours (Hard Dry)

Pack Size 12.5 litres

Cactus Liquid Applied Waterproof Roofing Solution Elastaseal Fibretex is a high build, heavy duty, fibre loaded stripe coating, to be used prior to over-coating with Elastaseal Z system.

Typical Thickness 0.9mm dft per coat
(depending on system)
Theoretical Coverage 1 square metre per litre per coat
Practical Coverage Dependent on surface profile, reinforcement where applicable etc.
Method of Application Brush or roller. May be used as the carrier for Elastamat glass fibre reinforcement matting on localised repairs.
Drying Time
(at 20°C and 1.0mm wet film)
8 hours (Touch Dry)

24 hours (Hard Dry)

Overcoating interval (24 hours minimum; 7 days maximum)

Pack Size 5 litres

12.5 litres

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

Plate Bonding – Cactus ARC 858

Live Leak Sealing A Drains Line

Bristle Blaster, Power Plant

View Similar Products...

Day Glow High Visibility Epoxy Fluorescent Coating application

Day Glow High Visibility Epoxy Fluorescent Coating

Day Glow High Visibility Epoxy Fluorescent Coating is an alkyd resin type high visibility finish coat. This single pack, rapi

Ceramic Polymer Adhesive is an ideal injection grade material

Ceramic Polymer Adhesive

Ceramic Polymer Adhesive is a surface tolerant ceramic polymer high-strength adhesive. This is a high viscosity, solvent-free

Sureseal Surface and Wet Tolerant Protective Coating is applied to offshore steelwork which had suffered corrosion damage

Sureseal Surface and Wet Tolerant Protective Coating

Sureseal Surface and Wet Tolerant Protective Coating can be applied and cures underwater. It adheres to wet and dry surfaces.

Need more info on our coatings & composites?

contact us