• ARC S2 Ceramic Reinforced Coating
enquire
ARC S2 Ceramic Reinforced Coating is applied to transport screw trough of a wastewater plant

Ceramic-Reinforced Coating is applied to the transport screw trough of a wastewater plant. It ensures an unwanted build up of effluent is avoided

ARC S2 Ceramic Reinforced Coating is applied to a tank's walls and floor

ARC S2 provides improved material flow properties and extends the operating life of equipment

ARC S2 Ceramic Reinforced Coating is applied to water tanks flooring and walls

ARC S2 is applied to a water tanks flooring and walls easily and effectively

ARC S2 Ceramic Reinforced Coating is applied to transport screw trough of a wastewater plant
ARC S2 Ceramic Reinforced Coating is applied to a tank's walls and floor
ARC S2 Ceramic Reinforced Coating is applied to water tanks flooring and walls

ARC S2 Ceramic Reinforced Coating is a thin film industrial coating.

It’s designed to protect structures and equipment against erosion, abrasion, and corrosion.

ARC S2 is a 100% solids, VOC free application that delivers a high gloss, low drag surface. It’s a high performance industrial Coating which is formulated to protect metal surfaces and resurface metal components subjected to extreme corrosive or severe fluid flow conditions.

This Coating improves material flow, offers a high adhesive strength which prevents underfilm corrosion and its abrasion resistant surface extends the life of operating equipment. It consists of low viscosity making it easy for spray application or by brush or roller.

ARC S2 Ceramic Reinforced Coating is designed to:

  • Protect against corrosion and erosion
  • Provide improved material flow properties
  • Safely and easily apply by brush, roller, airless, or heated plural component airless spraying

ARC S2 Ceramic Reinforced Coating application areas include:

  • Tank lining
  • Structural steel
  • Pipe ID & OD
  • Fans & housing
  • Condensers
  • Heat exchangers
  • Hoppers
  • Absorber modules​
  • Pumps & valves
enquire
Mix Ratio A:B By Weight 2.3 : 1

By Volume 2.0 : 1

Working Time 1.5 litres is 25 mins at 16°C (60°F)

5 litres is 23 mins at 16°C (60°F)

16 litres is 17 mins at 16°C (60°F)

Curing Schedule Tack Free at 16°C (60°F) is 3 hours

Light Load at 16°C (60°F) is 18 hours

Overcoat End at 16°C (60°F) is 30 hours

Full Load at 16°C (60°F) is 48 hours

Full Chemical at 16°C (60°F) is 96 hours

Tensile Adhesion (ASTM D 4541)

435 kg/cm² (42.7 MPa)

6200 psi

Vertical Sag Resistance

at 21°C (70°F) and 0.25 mm (10 mils)

No Sag
Maximum Temperature

(Dependent on service)

Wet Service is 52°C (125°F)

Dry Service is 80°C (175°F)

Cured Density 1.6 g/cc

99 lb/ cu.ft

Packaging and Coverage
Nominal based on 375 µm (15 mil)
1125 ml cartridge covers 3.00 m² (32.29 ft²)

1.5 litre kit covers 4.00 m² (43 ft²)

5 litre kit covers 13.33 m² (143.5 ft²)

16 litre kit covers 42.67 m² (459.2 ft²)

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

Plate Bonding – Cactus ARC 858

Live Leak Sealing A Drains Line

View Similar Products...

featured image for pmma-based anti-slip paint

PMMA-Based Anti Slip Paint

PMMA-Based Anti Slip Paint is a solvent-free, heavy duty anti-skid flooring system designed for areas subject to extreme abras

flange face corrosion repair kit featured image

Flange Face Forming Kit 234

One convenient kit for complete in-situ flange face forming repair. It packs all the equipment you'll need for rapid, effectiv

High Visibility Coating Polyaspartic Technology application

Polyaspartic High Visibility Coating

Polyaspartic High Visibility Coating is a high visibility, rapid-curing coating system. This is a high performance, two part

Need more info on our coatings & composites?

contact us