• ARC BX2 Industrial Wear Resistant Coating
enquire
ARC BX2 Industrial Wear Resistant Coating is applied to a settlement tank impellar

A stainless impeller is coated with ARC BX2 to extend its operating life agitating a settlement tank in a stoneworks

The impellar's surface is prepared ahead of ARC BX2 Industrial Wear Resistant Coating application

Before the application of ARC BX2 the old, damaged coating is removed and the surface prepared with the Bristle Blaster

ARC BX2 single coat Industrial Wear Resistant Coating is applied to impellar to protect the equipment in fine particle, abrasive sliding wear environments

ARC BX2 is a single coat application which is easily applied by trowel.

ARX BX2 Industrial Wear Resistant Coating protects impellar from erosion, corrosion and chemical attack

The impeller can now return to service. It's protected from the harsh environment and exposure to fine particle wear

ARC BX2 Industrial Wear Resistant Coating is applied to a settlement tank impellar
The impellar's surface is prepared ahead of ARC BX2 Industrial Wear Resistant Coating application
ARC BX2 single coat Industrial Wear Resistant Coating is applied to impellar to protect the equipment in fine particle, abrasive sliding wear environments
ARX BX2 Industrial Wear Resistant Coating protects impellar from erosion, corrosion and chemical attack

ARC BX2 Industrial Wear Resistant Coating is a modified epoxy trowel-grade Coating.

It’s reinforced for fine particle, abrasive sliding wear environments.

This is a 100% solids, VOC free single coat application. ARC BX2 is formulated with a high concentration of small ceramic beads and particles for extremely abrasive environments where metal loss is often repaired by more conventional and costly weld overlay.

This Industrial Wear Resistant Coating can be used to rebuild eroded metal surfaces or to protect and extend the operating life of equipment and structures that are exposed to fine particle wear. It frequently outperforms the original metal, rubber liners, ceramic tiles or weld overlay. This technology consists of a chemically resistant polymer matrix which covers a broad range of chemical exposures.

ARC BX2 is a long lasting wearing surface and is chosen over ARC BX1 where a thinner, more easily applied Abrasion Resistant Lining is required. It provides outstanding protection against erosion, corrosion and chemical attack.

ARC BX2 Industrial Wear Resistant Coating is designed to:

  • Protect areas exposed to moderate sliding abrasion
  • Resurface damaged metal in lieu of more traditional weld overlays
  • Replace ceramic tiles and rubber linings which can more easily disbond
  • Safely and easily apply by trowel

ARC BX2 Industrial Wear Resistant Coating application areas include:

  • Slurry pumps
  • Bins & hoppers
  • ​Fanblade & housing
  • Hydropulpers
  • Slurry pipes​
  • Hydro-cyclones
  • Transport screws
  • Wear plates
  • Tur​boseparators
  • P​ipe elbows & spools
  • Chutes & hoppers
  • Impellers
enquire
Mix Ratio A:B By Weight 4 : 1
Working Time 1.5 litres is 60 mins at 16°C (60°F)

5 litres is 40 mins at 16°C (60°F)

20kg is 45 mins at 16°C (60°F)

Curing Schedule Tack Free at 16°C (60°F) is 7 hours

Light Load at 16°C (60°F) is 24 hours

Full Load at 16°C (60°F) is 48 hours

Full Chemical at 16°C (60°F) is 72 hours

Pull Off Adhesion (ASTM D 4541)

>211 kg/cm² (>21 MPa)

>3000 psi

Vertical Sag Resistance

at  21°C (70°F) and 6mm (1/4″)

No Sag
Maximum Temperature

(Dependent on service)

Wet Service is 95°C (203°F)

Dry Service is 205°C (400°F)

Cured Density 2.1 g/cc

131 lb/ cu.ft.

Packaging and Coverage
Nominal, based on a 3mm (120 mil) thickness
1.5 litre kit covers 0.50 m² (5.38 ft²)

5 litre kit covers 1.67 m² (17.94 ft²)

20 kg kit covers 3.17 m² (34.10 ft²)

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

Plate Bonding – Cactus ARC 858

Live Leak Sealing A Drains Line

Bristle Blaster surface preparation tool is used for pipeline construction, maintenance and repair

Bristle Blaster, Pipeline Construction

View Similar Products...

featured image for pmma-based universal primer

PMMA-Based Universal Primer

PMMA-Based Universal Primer is a high performance multi-surface primer that delivers excellent adhesion on to absorbent and n

Epoxy ARC 791 High Build Concrete Repair Chemical Resistant Screed is applied to a wastewater weir

Epoxy ARC 791 High Build Concrete Repair Chemical Resistant Screed

Epoxy ARC 791 High Build Concrete Repair Chemical Resistant Screed is a high-build modified epoxy coating. It can bond to dam

cleankeep 5000 protective coating is applied to interior of water and waster water tank

Drinking Water Approved Coating Cleankeep 5000

Cleankeep 5000 Drinking Water Approved coating is a solvent-free epoxy protective coating specially designed for fresh water

Need more info on our coatings & composites?

contact us