Metal Repair and Rebuilding Compounds

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

ARC 858 Rebuilding and Faring Composite is a high build, single coat application. It fills corrosion pitting in metal quickly and effectively and offers a high strength bonding solution

ARC 10 Metal Repair Compound is used as an effect flange face forming and flange repair technology

ARC 10 Metal Compound is ideal an effective flange face forming technology

ARC 10 Metal Repair and Rebuilding Compound

ARC 10 Metal Compound is also a polymer alloy reinforced material with high build viscosity, suitable for rebuilding pitted and scored surfaces to a thickness of >6mm (.25”) in a single coat.

ARC 5 ES Emergency Leak Sealing Putty Grade Coating is kneaded and rolled into a cone shape and forced hard against the leak point, stopping the leak

ARC 5 Emergency Leak Sealing Putty Grade Coating cures underwater and on both damp and dry surfaces, at temperatures as low as 4°C (40°F)

arc 5 emergency leak sealing coating

ARC 5 Emergency Leak Sealing Coating is a trowel grade compound with patches and seals leaks up to 3mm (120 mil) diameter.

High Performance, Durable and Emergency Solutions.

Cactus Metal Repair and Rebuilding Compounds can be applied safely, quickly, easily and effectively. Our rapid cure technology ensures minimal down time and extends the operating life of structures and equipment, providing outstanding protection against erosion, corrosion and chemical attack.

Solutions for high and low temperatures, various pressures, extreme chemical environments and underwater and dry applications.


Metal Repair and Rebuilding Compounds are ideal for:
Resurfacing large pitted metal surfaces | In-situ flange repairs | Repairing cracks and holes on engine and pump casings, pipes, tanks and other equipment | Plate bonding

  • Excellent adhesion to manually prepared substrates where grit blasting can’t be achieved
  • Excellent adhesion to manually prepared damp, oil contaminated and underwater substrates
  • Rapid curing, event at low temperatures
  • Simple mix ratio
  • Solvent-free and low VOC applications
  • No shrinkage, expansion or distortion

View Metal Repair and Rebuilding Compounds products below:

ARC 858 Rebuilding and Faring Composite

ARC 858 Rebuilding and Faring Composite is a Ceramic Reinforced Abrasion Control Epoxy Compound. This is…

ARC 10 Metal Repair Compound is used as an effect flange face forming and flange repair technology

ARC 10 Metal Compound

ARC 10 Metal Compound is a machinable polymer alloy blend. This metal repair and rebuilding compound…

other Composites & Coatings

Erosion and Corrosion Protection

100% solids, VOC free solutions that provide high performance, long-term protection

urethane 80 rubber repair and protection mould

Rubber Repair and Protection

Flexible, high tensile and tear strength solutions that form a tough, rubber-like material that adheres to a variety of materials

ARC BX2 Industrial Wear Resistant Coating is applied to a settlement tank impellar

Abrasion Resistant Linings

Simple application and rapid cure solutions that protect equipment and structures exposed to moderate and extreme sliding wear and abrasion

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

High Strength Bonding Polymers

High viscosity, surface tolerant technology that provides excellent adhesion as well as chemical and abrasion resistance

Waterproofing Solutions

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus sit amet venenatis odio, ultricies tempus risus.

Apply protective coating to large surfaces quickly and easily with Mixpac Spray Technology

High Temperature Coatings

Nace certified technology that protects in temperatures exceeding 100°C and survives rapid decompression

High Strength Epoxy Resin Screed repairs and protects against abrasion and chemical attack

Anti-Skid and High Visibility Coatings

A fully reinforced moisture-triggered polyurethane waterproofing system that delivers a tough, slip-resistant surface

Self-Levelling Mortar Rapid Curing PMMA Technology is ideal solution for offshore deck, laydown and walkway areas

Concrete Repair and Protection

High-build and highly chemically resistant solutions that bond to dry concrete and damp concrete

Flange Preservation Wrap encapsulates both flanges when applied

Flange Corrosion Repair and Preservation

Rapid curing solutions that protect piping and metal structures and can also be cut open and effectively re-sealed for inspection

Apply coatings quickly and effectively with Sulzer Mixpac Spray Technology

Sulzer Mixpac Spray Technology

A portable, lightweight system that provides a fast, simple, and clean method to apply 2-component materials with a minimum amount of waste

Need more info on our coatings & composites?

contact us