Flange Corrosion Repair and Preservation

Flange Preservation Wrap protects piping and metal structures from corrosion

Flange Preservation Wrap protects steel and concrete from corrosion in even the most severe operating environments

Flange Preservation Wrap encapsulates both flanges when applied

The Flangecoat Preservation Wrap is easy to apply. It cures rapidly and the pipe can function immediately after the Wrap has been fitted

Flange Preservation Wrap is cut open and effectively re-sealed when flange inspection is required

Flangecoat Preservation Wrap can be easily cut and re-sealed when flange inspections are required

Protect Piping and Metal Structures From Corrosion.

Flange Corrosion Repair and Preservation can be applied safely, easily and quickly. This rapid curing solutions ensures minimal operational down time. The system can also be cut open and effectively re-sealed, allowing for inspection when required.

Solutions for use above or below ground, in dry, damp or wet operating conditions.

Flange Corrosion Repair and Preservation technology is ideal for application to:
Flanges  All types of piping  Bridge Crossings  Valves   Above and below ground applications including vaults and close quarters

  • Protect steel and concrete from corrosion in even severe operating environments
  • Ensure minimal down time. The pipe can function immediately after the Wrap has been fitted
  • Easily and quickly apply

View Cactus Flange Corrosion Repair and Preservation products below:

Flange Preservation Wrap protects piping and metal structures from corrosion

Flange Preservation Wrap

Flange Preservation Wrap is a cold applied, self-hardening wax-based Tape. This is a 100% solids, 60 mil wax-based…

ARC 10 Metal Repair Compound is used as an effect flange face forming and flange repair technology

ARC 10 Metal Compound

ARC 10 Metal Compound is a machinable polymer alloy blend. This metal repair and rebuilding compound…

other Composites & Coatings

Apply coatings quickly and effectively with Sulzer Mixpac Spray Technology

Sulzer Mixpac Spray Technology

A portable, lightweight system that provides a fast, simple, and clean method to apply 2-component materials with a minimum amount of waste

ARC 10 Metal Repair and Rebuilding Compound

Metal Repair and Rebuilding Compound

High performance, durable and emergency solutions that cure rapidly and ensure minimal operational down time

Erosion and Corrosion Protection

100% solids, VOC free solutions that provide high performance, long-term protection

urethane 80 rubber repair and protection mould

Rubber Repair and Protection

Flexible, high tensile and tear strength solutions that form a tough, rubber-like material that adheres to a variety of materials

ARC BX2 Industrial Wear Resistant Coating is applied to a settlement tank impellar

Abrasion Resistant Linings

Simple application and rapid cure solutions that protect equipment and structures exposed to moderate and extreme sliding wear and abrasion

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

High Strength Bonding Polymers

High viscosity, surface tolerant technology that provides excellent adhesion as well as chemical and abrasion resistance

PMMA-Based Waterproofing Coating liquid applied waterproofing solution

Waterproofing Solutions

Cold applied, high solids, low odour waterproofing systems.

Apply protective coating to large surfaces quickly and easily with Mixpac Spray Technology

High Temperature Coatings

Nace certified technology that protects in temperatures exceeding 100°C and survives rapid decompression

High Strength Epoxy Resin Screed repairs and protects against abrasion and chemical attack

Anti-Skid and High Visibility Coatings

A fully reinforced moisture-triggered polyurethane waterproofing system that delivers a tough, slip-resistant surface

Self-Levelling Mortar Rapid Curing PMMA Technology is ideal solution for offshore deck, laydown and walkway areas

Concrete Repair and Protection

High-build and highly chemically resistant solutions that bond to dry concrete and damp concrete

Need more info on our coatings & composites?

contact us