Erosion and Corrosion Protection

Sureseal Surface and Wet Tolerant Protective Coating is applied to offshore steelwork which had suffered corrosion damage

Sureseal Surface and Wet Tolerant Protective Coating provides corrosion and chemical resistance to this offshore walkway support steelwork

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

Ceramic Reinforced Abrasion Control Epoxy Compound protects metal surfaces subjected to erosion, corrosion and chemical attack

ARC S2 Ceramic Reinforced Coating is applied to transport screw trough of a wastewater plant

ARC S2 Ceramic-Reinforced Coating is applied to the transport screw trough of a wastewater plant. It ensures an unwanted build up of effluent is avoided

Effective, Long-Term Erosion and Corrosion Protection.

Cactus high performance Erosion and Corrosion Protection solutions can be applied safely, easily and quickly by hand brush, roller or spray technology. Our Composites and Coatings provide excellent adhesion to a number of metal surfaces including stainless steel, carbon steel and aluminium, protecting structures and equipment in the fight against erosion, corrosion and chemical attack.

Technology that delivers in 
various temperatures, pressures, extreme chemical environments as well as underwater and dry applications.

Erosion and Corrosion Protection solutions are ideal for:

Oil, gas and water separators | Pump Casings | Tanks and vessels (including sewage and underground) | Impellars and blades | Wind turbine blades | Centrifugal and positive displacement pumps | Heat exchangers, water boxes and tube sheets | Valves | Pumps, pipes, valves and other fluid handling equipment | Transport Screws | Bins and silos | Hoppers | Fans & housing Condensers Absorber modules Chemical s​torage tanks Chimneys & stacks | Flange faces Bridges Sheet piling and jetties

  • NACE certified solutions
  • Excellent adhesion to manually prepared substrates where grit blasting can’t be achieved
  • Excellent adhesion to manually prepared damp and dry surfaces
  • Rapid curing, event at low temperatures
  • Simple mix ratio
  • Solvent-free and low VOC applications
  • No shrinkage, expansion or distortion
  • 100% solids, no VOCs solutions

View Erosion and Corrosion Protection products below:

PMMA-Based Waterproofing Coating applied waterproofing solution

PMMA-Based Waterproofing Coating

PMMA-Based Waterproofing Coating is a low temperature, rapid curing and highly flexible cold-applied liquid coating for waterproofing…

Bioclean Antifoul Coating results on a water intake pipe over 6 years

Bioclean Antifoul Coating

Boiclean Antifoul Coating is a silicone-based foul-release coating which is specially designed for high fouling areas…

Sureseal Surface and Wet Tolerant Protective Coating is applied to offshore steelwork which had suffered corrosion damage

Sureseal Surface and Wet Tolerant Protective Coating

Sureseal Surface and Wet Tolerant Protective Coating can be applied and cures underwater. It adheres to wet…

ARC S4+ Severe Chemical Resistant Coating Product Packaging

ARC S4+ Severe Chemical-Resistant Coating

ARC S4+ Severe Chemical-Resistant Coating is an advanced reinforced thin film coating to protect structures against…

ARC S2 Ceramic Reinforced Coating is applied to transport screw trough of a wastewater plant

ARC S2 Ceramic Reinforced Coating

ARC S2 Ceramic Reinforced Coating is a thin film industrial coating. It's designed to protect structures…

ARC S1PW Moderate Chemical Resistant Coating

ARC S1PW Moderate Chemical Resistant Coating is a ceramic reinforced thin film coating. It protects structures against erosion,…

ARC HT-T high temperature resistant coating is applied to protect this metal equipment from erosion

ARC HT-T High Temperature Resistant Trowel Grade Coating

ARC HT-T High Temperature Resistant Coating is an advanced ceramic Trowel Grade Coating. This High Temperature Resistant…

ARC HT-S High Temperature Spray Coating is applied by airless spray

ARC HT-S High Temperature Resistant Spray Coating

ARC HT-S High Temperature Resistant Spray Coating is a ceramic reinforced abrasion epoxy. It protects metal…

Aggregate is added to the wet ARC 855 Chemical and Corrosion Resistant Coating to ensure greater adhesion when further layers are applied in this repair project

ARC 855 Chemical and Corrosion Resistant Coating

ARC 855 Chemical and Corrosion Resistant Coating is a chemically-resistant thin film coating. It features moderate…

other Composites & Coatings

Urethane 80 Rubber Repair and Protection mould

Rubber Repair and Protection

Flexible, high tensile and tear strength solutions that form a tough, rubber-like material that adheres to a variety of materials

ARC BX2 Industrial Wear Resistant Coating is applied to a settlement tank impellar

Abrasion Resistant Linings

Simple application and rapid cure solutions that protect equipment and structures exposed to moderate and extreme sliding wear and abrasion

ARC 858 high strength bonding polymer seals, shims and bonds new plates to a prepared surface on an offshore platform

High Strength Bonding Polymers

High viscosity, surface tolerant technology that provides excellent adhesion as well as chemical and abrasion resistance

PMMA-Based Waterproofing Coating applied waterproofing solution

Waterproofing Solutions

Cold applied, high solids, low odour waterproofing systems.

Apply protective coating to large surfaces quickly and easily with Mixpac Spray Technology

High Temperature Coatings

Nace certified technology that protects in temperatures exceeding 100°C and survives rapid decompression

High Strength Epoxy Resin Screed repairs and protects against abrasion and chemical attack

Anti-Skid and High Visibility Coatings

A fully reinforced moisture-triggered polyurethane waterproofing system that delivers a tough, slip-resistant surface

Self-Levelling Mortar Rapid Curing PMMA Technology is ideal solution for offshore deck, laydown and walkway areas

Concrete Repair and Protection

High-build and highly chemically resistant solutions that bond to dry concrete and damp concrete.

Flange Preservation Wrap encapsulates both flanges to protect the structures from corrosion

Flange Corrosion Repair and Preservation

Rapid curing solutions that protect piping and metal structures and can also be cut open and effectively re-sealed for inspection

Apply coatings quickly and effectively with Sulzer Mixpac Spray Technology

Sulzer Mixpac Spray Technology

A portable, lightweight system that provides a fast, simple, and clean method to apply 2-component materials with a minimum amount of waste

ARC 10 Metal Repair and Rebuilding Compound enforces a pipe wrap and ensures a successful live leaks sealing

Metal Repair and Rebuilding Compound

High performance, durable and emergency solutions that cure rapidly and ensure minimal operational down time

Need more info on our coatings & composites?

contact us